Офис в Москве
Новгородская, 1-508/2,
Москва, РФ, 127576
+7 (499) 1124515
info@ledz.by
Офіс у Мінску
Машэрава, 17-206,
Мінск, Беларусь, 220029
+375 (29) 7655121, 5021
Office in Vilnius
Rodūnios kel. 28-226,
Vilnius, Lithuania, LT-02187
+370 (5) 2111433
In stock

ledz e-Road

120.36Br616.80Br

Category:

LED console luminaires e-Road are designed for installation on a pipe (console) with a diameter of 45 to 60 mm. The luminaire is very compact and lightweight as the tube fits into the luminaire body. The e-Road components are easy to replace: the driver and LEDs are connected using sealed terminal blocks from the USA. Optionally, the top cover is removable.

This allows, if necessary, to carry out repairs directly on the support. If there is no cover, then the body is completely aluminum. The luminaire is equipped with a choice of LEDiL optics with various KSS (L, W, W90), transparent flat diffuser made of Novattro polycarbonate or silicate glass. There is a version with the ability to set the time mode you need.

 We work with individuals and legal entities;
 We will complete any delivery on time;
 -10% on the first order for promo first10.

26-196

power, W

5 years

warranty

IP66

protection

Al6061

body

OSRAM

LEDs

100000

lifetime, hrs

Options

In addition to the basic configuration, you can “assemble” your luminaire: select the required components and options.

lead-in sealed
glands

LoRaWAN
antenna

swivel
mount

wall
mount

variable
brightness

control
system

fireproof
body

painting in
any color

Description of the luminaire

ledz e-Road outdoor console LED luminaires can be used on roads, highways, parking lots and adjoining territories. The aluminum body of the luminaire allows you to install a choice of Finnish LEDiL optics, a flat transparent or matt diffuser made of Novattro polycarbonate or silicate glass. The ledz e-Road LED street light is very light and compact: with a power of 196 W, it weighs only 4.6 kg, because the support is inserted into the body.

An optional removable plastic cover is installed that covers the compartment with a sealed waterproof driver and provides quick access. Sealed 3M terminal blocks, filled with hydrophobic gel, allow you to replace the driver on the pole without removing the luminaire. This makes it easier to operate and lowers the costs of the organizations servicing these luminaires. The aluminum profile has an anodized coating to protect the metal from oxidation or is powder painted.

Luminaire options of e-Road

The e-Road luminaire has a wide range of powers from 26 to 196 W and many options. You can choose a luminaire for any of your projects, from courtyard lighting to the M6 ​​motorway. Our engineers will perform 3D illumination calculations and help you choose the optimal LEDiL optics with the required KCC (DWC, ME, 90° and others). This will reduce the uneven illumination of the roadway, parking to the required minimum, or completely eliminate light spots.

Optionally, the luminaire can be controlled remotely by wires or wirelessly using the LoRa protocol. To operate the system, one controller is additionally installed for a group of up to 256 luminaires, and in the case of command transmission over long distances, also a GSM transmitter. There is also a version of the luminaire with a programmable e-Road auto mode: the time of switching on, switching off, decreasing, increasing brightness are set during manufacture and can be changed by us.

Luminaire advantages

Why is the e-Road luminaire better than others?

01.

Double moisture
protection

A waterproof driver with
IP67 protection is placed
inside the luminaire.

All connections are made
with sealed terminal blocks.

02.

A2 steel
screws

Stainless steel screws
do not rust even in
corrosive environments.

You can install our
luminaire on any object.

03.

Aluminum
body

The aluminum body cools
the LEDs well to the
correct temperature.

The luminaire is durable,
it is securely attached.

04.

Diffusers
and optics

We use only modern
Novattro diffusers
and LEDiL lenses.

They have the highest
transparency among analogs.

05.

Thermal
calculations

The body of our luminaire
is designed in the program,
which allowed us to improve it.

The 196 W luminaire
weighs only 4.6 kg!

06.

Console
mount

The console fits into
the body, which made it
possible to shorten it.

Weight 0 kg
Dimensions N/A
Body

aluminum anodized

Glass

PMMA Novattro (transparent, matte), optics LEDiL

LEDs

OSRAM, Lumileds, Samsung

Mount

cantilevered (per pipe up to 60 mm)

Color, K

4000, 5000 К

CRI

75, 85 Ra

Protection

not less than IP66

Voltage

176-264 V

cosф

≥0,98

Temperature

from -40 to +40°C

For order

If the manufacturer decides to change the characteristics of the product, then he will not notify customers and partners. As soon as you need additional characteristics or documentation, you can request them from your personal manager. If you want to buy luminaires, select the required model in terms of power or luminous flux in the table and tell the manager the article. Articles contain detailed information about the product and its characteristics in their name.

40-700 D0, where
40 – body length, cm
700 – LED current, mA
D0 – transparent diffuser (DL – optics, DT – tempered glass)

SKU Watts Lumens Dimensions
30-700 D0 26.2 4114 310х87х100
40-700 D0 52.4 8228 410х87х100
60-700 D0 78.6 12342 610х87х100
80-700 D0 102.5 16456 810х87х100
100-700 D0 128.1 20570 1010х87х100
120-700 D0 153.8 24684 1210х87х100
140-700 D0 179.4 28798 1410х87х100
30-1050 D0 39.3 5998 310х87х100
50-1050 D0 78.6 11996 510х87х100
75-1050 D0 117.9 17994 760х87х100
100-1050 D0 157.2 23992 1010х87х100
125-1050 D0 196.5 29990 1260х87х100
40-1400 D0 57 7410 410х87х100
80-1400 D0 114 14820 810х87х100
120-1400 D0 171.1 22230 1210х87х100
We use cookies.