ledz e-Street

Options

In addition to the basic configuration, you can “assemble” your luminaire: select the required components and options.

Description of the luminaire

Stylish outdoor console LED lamps ledz e-Street can be used on roads, highways, parking lots and adjoining areas. The aluminum body of the luminaire allows the Finnish LEDiL optics to be installed under flat tempered glass. The ledz e-Street LED street light is very light and compact: with a power of 165 W, it weighs only 6 kg, because the support is inserted into the body. It can be installed on a floor-type euro pole and the angle of inclination can be adjusted.

The case is equipped with a removable aluminum cover that covers the compartment with a sealed waterproof driver and provides quick access. Sealed 3M terminal blocks, filled with hydrophobic gel, allow you to replace the driver on the pole without removing the luminaire. This makes it easier to operate and lowers the costs of the organizations servicing these luminaires. The aluminum profile has a dense powder coating to protect the metal from oxidation in an open environment.

Luminaire options of e-Street

The e-Street luminaire has a wide range of powers from 55 to 180 W and many options. You can choose a luminaire for any of your projects, from courtyard lighting to the M6 ​​motorway. Our engineers will perform 3D illumination calculations and help you choose the optimal LEDiL optics with the required KCC (DWC, ME, 90° and others). This will reduce the uneven illumination of the roadway, parking to the required minimum, or completely eliminate light spots.

Optionally, the luminaire can be controlled remotely by wires or wirelessly using the LoRa protocol. To operate the system, one controller is additionally installed for a group of up to 256 luminaires, and in the case of command transmission over long distances, also a GSM transmitter. There is also a version of the luminaire with a programmable e-Street auto mode: the time of switching on, switching off, decreasing, increasing brightness are set during manufacture and can be changed by us.