Options
In addition to the basic configuration, you can “assemble” your luminaire: select the required components and options.
Luminaire-pole description
LED park lighting poles e-Park have a modern look and high efficiency rates of 164 lm/W thanks to LED modules of our own design and Finnish LEDiL optics. The support is made of durable steel and painted with a gas flame method, which protects the metal from corrosion and is easily restored to its original condition. Installed on a concrete or reinforcing cup to be filled with concrete and secured with nuts.
The design provides easy access for the operating organization due to the special design of the hatch, located at a convenient height, and a special lock will protect against penetration inside. The terminal block installed inside is grounded and additionally protected from corrosion, and the set includes 3M terminal blocks with hydrophobic gel to protect electrical connections from condensation. The driver at the bottom is easily accessible from the hatch and is replaced if necessary, like the LED modules.
Pole options of e-Park
LL series
park support luminaire in the shape of
the letter L, shines from one side
TL series
park support T-shaped luminaire,
shines in two directions
ZL series
park support luminaire in the shape of
the letter Z, shines in two directions
The e-Park decorative park pole has a wide power range from 26 to 228 W and various options. You can find a light fixture for any object, from the lighting of a small boutique to a hotel, shopping mall or a Category IV road. Our engineers will carry out 3D illumination calculations and help you choose the optimal optics with the required KCC (DWC, ME, 90° and others). This will reduce the unevenness of illumination to the required minimum or highlight the desired details.
Optionally, the luminaire can be remotely controlled via the DALI protocol. To operate the system, one controller is additionally installed for a group of up to 256 lamps, and in the case of command transmission over long distances, also a GSM transmitter. There is also a version of the luminaire with a programmable time-based operating mode: the time of switching on, off, decreasing, increasing the brightness is set during manufacture and can be changed at any time without lifting to the support.
Luminaire advantages
Why is the e-Park luminaire-pole better than others?
01.
Double moisture
protection
A waterproof driver
with IP67 protection is
located inside the support.
All connections are made
with sealed terminal blocks.
02.
Screws
steel A2
Stainless steel screws
do not rust even in
corrosive environments.
You can install our
luminaire on any object.
03.
Body made of
steel, aluminum
The aluminum block cools
the LEDs well to the
correct temperature.
The steel support itself
is very strong and durable.
04.
Diffusers
and optics
We use only modern
Novattro diffusers
and LEDiL lenses.
They have the highest
transparency among analogs.
05.
Flame
paint
Flame coating protects
steel from corrosion
and is easy to repair.
If the support is damaged,
you can paint over the damage.
06.
Substructure
to choose
There are two types of
foundations to choose from:
concrete and reinforced.

