Site icon ledz lighting. Manufacture of LED Luminaires and Automatics

ledz e-Panel

36-54

power, W

5 years

warranty

IP40/54

protection

Al+Fe

body

Philips

LEDs

50000

lifetime, hrs

Options

In addition to the basic configuration, you can “assemble” your luminaire: select the required components and options.

emergency power
supply unit

drywall
mount

motion
sensor

light
sensor

variable
brightness

control
system

Panel description

The ledz e-Panel LED office panel is manufactured at our plant in Minsk. The working principle of our panel is different from other models made in China. The LEDs in it are not located at the ends, but on the back cover, like a conventional lamp. Thanks to this, the LEDs are well cooled, and the panel itself has become more maintainable and its reliability has increased. The driver is located outside and is connected to the panel using a removable connector for quick replacement.

The e-Panel has a light output of 101 lm/W, which is 30% higher than traditional Chinese panels. In this case, the glow of the diffuser is completely uniform and not a single point from the LED is visible. Inside the case, a diffusing lens is installed on each of the diodes, which distributes light over the screen. The body is assembled from an aluminum frame and a stamped base made of painted sheet metal, to which LED bars with Philips high-performance LEDs are attached.

Luminaire versions of e-Panel

The standard version of the e-Panel LED panel is IP40 dust and moisture resistant, but there is also an IP54 version for rooms with moisture or water-based fire extinguishing systems. A microwave motion sensor can be built into the e-Panel sensm version, and a light sensor can be built into the e-Panel sensl version. The panel has high rigidity, so it can be suspended on cables, built into an armstrong or built into drywall using clamps (purchased separately).

Luminaire housings in the basic version are powder painted in white. Optionally, we can paint them in any other colors from the RAL palette when ordering more than 50 pieces. Additionally, you can purchase spring hangers that can be adjusted in height after installation. With their help, you will facilitate the installation of luminaires and save time. Thanks to high-quality components, it has a lifespan of 50,000 hours, and a full 5-year warranty against any failure.

Преимущества светильника

Why is the e-Panel luminaire better than others?

01.

Metal
body

The luminaires are
made of sheet metal or
aluminum profiles.

We have luminaires for
all types of ceilings.

02.

Terminal block
outside

The supply terminal block is
brought out, which is very
convenient for quick connection.

There is no need to disassemble
the case to connect it.

03.

Universal
installation

The luminaires can be built
into an armstrong, fixed to the
ceiling and suspended from cables.

It can also be integrated into
drywall with the help of the fixing.

04.

Typical
sizes

The size of the luminaire is
595×595 mm, which allows it to
be used with any Armstrong ceilings.

Exit mobile version